Altronic Mags

Altronic I

Altronic I ignition consists of a permanent magnet alternator unit, one or more remote mounted pickups sensing crankshaft-referenced timing magnets and an ignition coil for each spark plug. Long maintenance-free service is assured since the alternator’s oversized ball bearing is the only moving part. All electronic parts plus the ignition and pickup coils are encapsulated in epoxy.

Brochure
Application Guide
Installation Guide

Altronic II

The Altronic II is an alternator powered, capacitor discharge ignition system for 3 to 20 cylinder, 2 or 4 cycle, low speed, high BMEP engines. Powered from a 12-pole permanent magnet alternator, Altronic II provides superior performance throughout the engine’s operating range. Its basic design features – permanent magnet alternator: easily serviced, removable back cover containing all electronics – have made Altronic II the standard of the industry on large, slow speed industrial gas engines.

Brochure
Application Guide
Installation Guide

Altronic III

The Altronic III’s mechanical design matches the long life inherent in the electronic circuitry. Sealed ball bearings used throughout are large and under-loaded. The alternator has a smooth rotating cycle – a characteristic which contributes to prolonged bearing and gear life. The synthetic couplings used provide long life with minimal wear and also dampen out much of the engine drive train vibration.

Brochure
Application Guide
Installation Guide

Altronic V

The Altronic V is a self powered, low tension, capacitor discharge ignition system for 1 to 6 cylinder, 2 or 4 cycle
engines. The Altronic V unit can be furnished with any number of output channels between 1 and 6. For 4 cycle applications, a choice is offered of units using the exhaust stroke firing principle or units firing on the compression stroke only. The Altronic V has internal timing pick-up coils combined with Altronic’s proven 8-pole permanent magnet alternator to give high output at low engine cranking speeds. The electronic circuit has a minimum of components for maximum reliability, and all are mounted on the unit’s removable back cover for ease of service.

Brochure
Application Guide
Installation Guide

Distributor for:              

Copyright 2017 Ignition Systems & Controls, INC.