|
Altronic I Altronic I ignition consists
of a permanent magnet alternator unit, one or more remote
mounted pickups sensing crankshaft-referenced timing magnets and
an ignition coil for each spark plug. Long maintenance-free
service is assured since the alternator's oversized ball bearing
is the only moving part. All electronic parts plus the ignition
and pickup coils are encapsulated in epoxy.
 |
Brochure |
Application Guide |
Installation Guide |
 |
 |
 |
Altronic II
The Altronic II is an alternator powered, capacitor discharge
ignition system for 3 to 20 cylinder, 2 or 4 cycle, low speed,
high BMEP engines. Powered from a 12-pole permanent magnet
alternator, Altronic II provides superior performance throughout
the engine's operating range. Its basic design features-
permanent magnet alternator: easily serviced, removable back
cover containing all electronics - have made Altronic II the
standard of the industry on large, slow speed industrial gas
engines.
 |
Brochure |
Application Guide |
Installation Guide |
 |
 |
 |
Altronic III
The Altronic III's mechanical design matches the long life
inherent in the electronic circuitry. Sealed ball bearings used
throughout are large and under-loaded. The alternator has a
smooth rotating cycle - a characteristic which contributes to
prolonged bearing and gear life. The synthetic couplings used
provide long life with minimal wear and also dampen out much of
the engine drive train vibration.
 |
Brochure |
Application Guide |
Installation Guide |
 |
 |
 |
Altronic V
The Altronic V is a self powered, low tension, capacitor
discharge ignition system for 1 to 6 cylinder, 2 or 4 cycle
engines. The Altronic V unit can be furnished with any number of
output channels between 1 and 6. For 4 cycle applications, a
choice is offered of units using the exhaust stroke firing
principle or units firing on the compression stroke only. The
Altronic V has internal timing pick-up coils combined with
Altronic's proven 8-pole permanent magnet alternator to give
high output at low engine cranking speeds. The electronic
circuit has a minimum of components for maximum reliability, and
all are mounted on the unit's removable back cover for ease of
service.
 |
Brochure |
Application Guide |
Installation Guide |
 |
 |
 |
|
